Solar Commissioning · Uganda
Solar commissioning in Uganda — the handover that proves your system actually works.
A surprising number of inverters in Uganda run on factory defaults — wrong charge voltages, wrong cut-offs, wrong battery chemistry. The system runs for a few months, the lithium pack quietly cooks itself, and the warranty disappears with the receipt. We programme every parameter to your actual battery and your actual load, then sign a settings sheet you keep.
Solar commissioning in Uganda means every inverter parameter set against your specific battery datasheet (bulk, absorption, float voltages; low-voltage cut-off; charge-current limits; AC input window), tested under measured load, and recorded on a signed settings sheet at handover. NilePhase commissions Deye, Victron, Felicity, Growatt, SRNE and Cworth installs across Kampala, Mukono, Wakiso, Jinja and Mbarara — including systems installed by other companies.
A recent commissioning
What we configure
Every parameter matched to your battery and usage
We don't use generic presets. Each setting is calculated from your battery manufacturer's datasheet and your actual power usage pattern.
Bulk / absorption / float charge voltages (matched to battery chemistry)
Low-voltage cut-off and reconnect thresholds
Maximum charge current limits
AC input voltage range and frequency
Output source priority (solar / battery / grid)
Generator start/stop voltage thresholds
Generator charging current limit
MPPT string voltage window verification
Time-of-use scheduling (where supported)
Parallel / phase configuration (multi-inverter systems)
Brands we commission
All major inverter brands used in Uganda
Whether you have a Deye, Victron, Luminous, Growatt, Must, Kodak, Mecer, or Felicity — we know the firmware, the menus, and the settings that matter.
Deye
Hybrid & off-grid
Victron
MultiPlus & EasySolar
Growatt
SPF & MIN series
Luminous
Cruze & NXG series
Brand comparison
Inverter brands we commission in Uganda
Each brand has its own firmware, menu structure and programming workflow. We know all of them.
| Brand | Type | Typical use in Uganda | Battery compatibility | Manufacturer warranty | Programming interface |
|---|---|---|---|---|---|
| Deye | Hybrid / off-grid | Homes, SMEs, clinics | LiFePO4, Lead-acid | 5 years | SolarmanPro app + LCD |
| Victron | Hybrid / off-grid | Premium homes, C&I | LiFePO4, Lead-acid, AGM, GEL | 5 years | VictronConnect app + VEConfigure |
| Growatt | Hybrid / off-grid | Homes, budget SMEs | LiFePO4, Lead-acid | 5 years | ShinePhone app + LCD |
| Luminous | Off-grid | Homes, small shops | Lead-acid, tubular | 2 years | LCD menu only |
| Sunsynk | Hybrid | Homes, SMEs | LiFePO4 | 5 years | Sunsynk app + LCD |
| Must / Kodak / Mecer | Off-grid | Entry-level homes | Lead-acid | 1–2 years | LCD menu only |
Don't see your brand? Contact us — we commission most inverters sold in Uganda.
What you receive
A written settings sheet — not just a verbal handover
Most buyers in Uganda can't verify what settings their inverter is running. We change that. You get a document showing every parameter we configured, why, and what to check if something changes.
Your settings sheet includes:
- 01 Inverter make, model, and firmware version
- 02 Battery type, capacity, and chemistry confirmed
- 03 Every charge parameter with value and reason
- 04 Output priority and generator interaction settings
- 05 PV string configuration and MPPT verification
- 06 Date, technician name, and contact for follow-up